跪求：如何用matlab做专家PID控制的仿真

条件太少，自己做了，可以出结果,
%Integration separation PID Controller
clear all;
close all;

ts=5;
%delay plant
sys=tf([1],[30,1],'inputdelay',10);
dsys=c2d(sys,ts,'zoh');
[num,den]=tfdata(dsys,'v');

u_1=0;u_2=0;u_3=0;u_4=0;u_5=0;
y_1=0;y_2=0;y_3=0;
error_1=0;error_2=0;
ei=0;
for k=1:1:200
time(k)=k*ts;

%delay plant
yout(k)=-den(2)*y_1+num(2)*u_5;

%I separation
rin(k)=40;
error(k)=rin(k)-yout(k);
ei=ei+error(k)*ts;

M=2;
if M==1 %using integration separation
if abs(error(k))>=30&abs(error(k))<=40
beta=0.3;
elseif abs(error(k))>=20&abs(error(k))<=30
beta=0.6;
elseif abs(error(k))>=10&abs(error(k))<=20
beta=0.9;
else
beta=1.0;
end
elseif M==2
beta=1.0; %not using integration separation
end

kp=0.80;
ki=0.005;
kd=3.0;
u(k)=kp*error(k)+kd*(error(k)-error_1)/ts+beta*ki*ei;

if u(k)>=110
u(k)=110;
end
if u(k)<=-110
u(k)=110;
end

u_5=u_4;u_4=u_3;u_3=u_2;u_2=u_1;u_1=u(k);
y_3=y_2;y_2=y_1;y_1=yout(k);

error_2=error_1;
error_1=error(k);
end

figure(1);
plot(time,rin,'b',time,yout,'r');
xlabel('time(s)');ylabel('rin,yout');
figure(2);
plot(time,u,'r');
xlabel('time(s)');ylabel('u');